_______________________________________________________________
.All the external interfaces are identified by icons.
-MOUSE: PS/2 mouse port
.Shape: industry standard connector for PS/2 mouse
.Location: far left at the rear
.Cover: None
.Icon:
-PS/2 Keyboard: a port for external PS/2 keyboard
.Shape: industry standard connector for PS/2 KB
.Location: the rear, next to the PS/2 mouse port
.Cover: None
.Icon:
-Printer: parallel port(Centronics)
.Shape: industry standard 25 pin D-sub
.Location: the rear, far right (upper)
.Cover: a dedicated cover for Printer port
.Icon:
-COMMS: serial port(RS232C)
Shape: industry standard 9 pin D-sub
.Location: the rear, next to the RGB port
.Cover: a cover which covers COMMS port and RGB port
.Icon:
-RGB: external monitor port
.Shape: industry standard 15 pin D-sub, analog type
.Location: the rear, far left (lower)
.Cover: a cover which covers COMMS port and RGB port
.Icon:
-Port for Kensington Cable Lock
.Shape: a port based on the specifications recommended by Kensington
.Location: the left side, the center
.Cover: none
.Icon:
-AccuPoint:
.Location of stick: among G, H and B keys
.Location of buttons: front edge of the systems
.Cover: n/a
.Icon: n/a
8 spare AccuPoint caps are supplied with SEATTLE. Please be sure not to remove the cap more than 50 times and 5 times per each cap. This is because excess replacement will make the material on the stick removed and the cap itself worn out. The material protects the system unit from static electricity.
-Audio Jacks (for external headphone & external microphone)
.Location: the rear side, next to the keyboard port (the microphone is located at the left side)
.Cover: None
.Icon:
External Microphone
External Headphone
Microphone will be trandfered to monoral even when stereo jack is inserted, since ES688 input is monoral.
Headphone is stereo output.
-DC IN 15V: a DC IN port connecting to AC Adapter
.Shape: Toshiba's standard 2 pin connector(female)
.Location: the rear
.Cover: None
.Icon:
DC IN
15V
-Expansion Port: Expansion port for DeskStation 8
.Shape: 240pin connector for DeskStation 8
.Location: the rear side, center
.Cover: a plastic cover
.Icon:
-PC Card slot: 10.5mm height x1 or 5mm height x2
.Shape: standard 68 pin PCMCIA connector
.Location: the right side, two PC Card connectors are stacked in a slot. Lower connector is slot 0 and upper is slot 1.
.Cover: "snap-in" 3-part door
.Eject Button: a "sliding type" ejector on the bottom of the machine
.Stopper: None
.Icon: one icon for two PC Card slots
*: Power Budget
+5V+-5%:300mA per slot
+12V+-5%:50mA per slot
+3.3V+-0.3V:500mA per slot
-POWER: the power button to turn the system on or off
.Shape: square
.Location: the left side
.Icon:
-RESET: the reset button to reboot the computer
.Location: the left side, the right of POWER button
.Cover: none
.Icon:
-EXP. MEMORY: optional memory card slot
.Shape: Seattle proprietary stacking connector
.Location: Bottom
.Cover: Slot cover with 2 screws
.Icon: None
-FDD Port
.Shape: proprietary 26 pin connector
.Location: right side, next to PC Card slot
.Cover: none
.Icon:
-SIR Port
.Shape: IrDA 1.0 standard InfraRed transmitter and receiver
.Location: the rear, next to headphone jack
.Cover: none
-Audio Volume
.Shape: Jog dial
.Location: top
.Cover: none
.Icon: