_______________________________________________________________
Reconfiguration Guide for T2150 Series (90113)
| Summary: | Reconfiguration Guide for T2150CD Series |
| Date: | September 12, 1995 |
| Product: | T2150CD Series |
| Additional Information: | None |
Your T2150CD Series computer comes with a number of programs pre-installed on the hard disk. This guide describes the steps to follow if you ever need to reinstall one or more of these programs.
To reconfigure your computer, you'll need master program files for all the programs that came pre-installed on your computer. You can create master program diskettes using Master Disk Creator, or purchase master program files from Toshiba on diskette or CD-ROM.
To reconfigure your computer using master program diskettes, complete the steps in "Format the Hard Disk," "Install MS-DOS," and "Install the Toshiba Companion Programs," then refer to "Reconfiguring Using Diskettes" on page 5 for reconfiguration instructions.
To reconfigure your computer using the master program CD-ROM, complete the steps in "Format the Hard Disk," "Install MS-DOS," and "Install the Toshiba Companion Programs," then refer to "Reconfiguring Using the CD-ROM" on page 18 for reconfiguration instructions.
If you do not have the master program files on diskette or CD-ROM, use one of the following methods to start Master Disk Creator now:
¨Choose the Master Disk Creator icon in the Toshiba Utilities program group, OR
¨At the system prompt, type c:\img\mdc and press Enter.
Refer to the "T2150CD Series User's Guide" that came with your computer for more information about using Master Disk Creator to create master program diskettes.
If you cannot get Master Disk Creator to run, or would prefer to purchase the program files on diskette or CD-ROM, contact the Diskette Fulfillment Center at 800-276-3238.
WARNING:Formatting erases all the files on the hard disk. Follow the instructions in this section only if you're doing a complete reinstallation process.
If you're reinstalling all the files on your hard disk, it's a good idea to reformat the drive first. This removes all the old files, ensuring the most efficient use of the hard disk space.
To reformat the hard disk, follow these steps:
1Remove any diskette from the external diskette drive and insert the diskette labeled MS-DOS Setup Disk 1.
2Turn the computer on or press Ctrl + Alt + Del to restart it.
3When the first screen appears, press F3 to exit the setup program.
4Press F3 again to confirm your choice.
The setup program closes, returning you to the system prompt.
5Type format c: /Q and press Enter. (Make sure you type the /Q command option in upper-case.)
6Type Y and press Enter to begin the format.
MS-DOS formats the hard disk, then prompts you for a volume label.
7If you wish, type in a volume label of up to 11 characters.
8Press Enter.
You must reinstall MS-DOS on your computer before you can use the CD-ROM drive and, consequently, before you can use the master program CD-ROM to reinstall other programs. Follow these steps to install MS-DOS:
1Remove any diskette from the external diskette drive and insert the diskette labeled MS-DOS Setup Disk 1.
2Turn the computer on or press Ctrl + Alt + Del to restart it.
The setup program installs MS-DOS on your hard disk. As it does so, the setup program instructs you to enter information.
3When the setup program asks you for information, press Enter to accept the default values.
4Follow the setup instructions on the screen, changing diskettes as requested.
The Toshiba Companion programs include TSETUP and the diagnostic test. To reinstall the Toshiba companion programs, follow these steps:
1Remove any diskette from the external diskette drive and insert the diskette labeled Toshiba Companion Disk.
2Press Ctrl + Alt + Del to restart the computer.
The installation program displays a welcome screen.
3Press Enter to clear the welcome screen.
The installation program displays the main menu screen.
4Choose Install Utilities and Files and press Enter.
The installation program displays the install screen.
5Choose Install T2150 and press Enter.
The installation program asks you to enter the desired directory.
6Press Enter to accept the default directory path.
7When the installation is complete, press Enter.
The installation program displays the install screen.
8Choose Install CD-ROM and press Enter.
The installation program asks you enter the desired directory.
9Press Enter to accept the default path.
The installation program displays the message: Directory not found, press ESC to abort, Enter to create.
10Press Enter again to create the directory.
The installation program copies the companion files to the hard disk.
11When the installation is complete, press Enter.
12Press Esc to close the install window.
13Choose Exit to DOS and press Enter.
14Remove the Toshiba Companion Disk from the external diskette drive.
15Press Ctrl + Alt + Del to restart the computer.
This section provides instructions for reconfiguring your computer using master program diskettes you created with Master Disk Creator or purchased from the Toshiba Disk Fulfillment Center. Refer to "Reconfiguring Using the CD-ROM" on page 18 if you're reconfiguring your computer using the master program CD-ROM.
The Toshiba MS-DOS enhancements control many of your computer's special features. To reinstall these enhancements, follow these steps:
1Remove any diskette from the external diskette drive and insert the diskette labeled Toshiba Special Enhancements Disk.
2From the system prompt (for example, c:\>) type a:\setup and press Enter.
3Follow the instructions on the screen.
The setup program copies the Toshiba MS-DOS enhancement files onto your hard disk.
This section describes how to reinstall Windows and all the Toshiba Windows-based programs.
This section tells you how to run the Windows Setup program. See your Windows documentation for specific information about Setup. To run Setup, follow these steps:
1Remove any diskette from the external diskette drive and insert the diskette labeled Windows Setup Disk 1.
2From the system prompt, type a:\setup and press Enter.
Setup installs the Windows files, lets you know when to insert new diskettes, selects an appropriate setup for your computer and returns you to the system prompt.
NOTE:When you start Windows, it will be slightly different than when you first started the computer. The opening screen displays "Microsoft" instead of "Toshiba," the wallpaper is different and several unnecessary icons are not included. These changes are cosmetic only and do not affect the operation of your computer or Windows.
To reinstall MaxTime, Hardware Setup and Fn-esse, follow these steps:
1Make sure Windows is running. If it isn't, type win and press Enter to start it now.
2Remove any diskette from the external diskette drive and insert the diskette labeled Toshiba Windows Utilities.
3In Program Manager, choose Run from the File menu.
Windows opens the Run dialog box.
4Type a:\setup and choose OK.
5Press Enter to accept the default path.
6Choose OK to end the installation process and return to Program Manager.
To reinstall the AccuPoint driver, follow these steps:
1Remove any diskette from the external diskette drive and insert the diskette labeled Logitech™ MouseWare.
2Make sure Windows is running. If it isn't, type win and press Enter to start it now.
3In Program Manager, choose Run from the File menu.
Windows opens the Run dialog box.
4Type a:\install and choose OK.
The installation program asks you to enter some information.
5Press Enter to accept the defaults.
NOTE:After you install the AccuPoint driver, you will see the AccuPoint Control screen the next time you start Windows. Unless you want to change something on this screen, choose OK to close it and continue.
To reinstall the magiCDisc CD-ROM management program, follow these steps:
1Remove any diskette from the external diskette drive and insert the diskette labeled Toshiba magiCDisc.
2Make sure Windows is running. If it isn't, type win and press Enter to start it now.
3In the Program Manager window, choose Run from the File menu.
Windows displays the Run dialog box.
4In the Command Line field, type a:\setup and choose OK or press Enter.
The setup program displays an opening screen.
5Choose OK to continue.
The setup program prompts you to select a path.
6Choose OK to accept the default path (C:\MAGICD).
The setup program copies the magiCDisc program files to your hard disk.
7Choose Cancel to return to Windows.
8Exit Windows and restart it to complete the installation.
To install the Toshiba ESS Sound System, follow these steps:
1Remove any diskette from the external diskette drive and insert the diskette labeled Toshiba ESS Sound System Disk #1.
2Make sure Windows is running. If it isn't, type win and press Enter to start it now.
3In the Program Manager window, choose Run from the File menu. Windows displays the Run dialog box.
4In the Command Line field, type a:\setup and choose OK or press Enter.
The setup program displays an opening screen.
5Choose Continue.
6Choose Driver Installation and verify the settings.
7Choose OK.
8Choose Software Installation. The setup program prompts you to select a directory.
9Choose OK to accept the default directory (C:\PCAUDIO).
10Choose Create Directory.
11Choose Complete Installation. The setup program begins copying files to your hard disk.
12When prompted, remove Disk #1 from the external diskette drive and replace it with the diskette labeled Toshiba ESS Sound System Disk #2.
13Choose OK.
14When the setup is complete, choose Exit the Setup Program.
Toshiba Card Manager controls how your computer communicates with PC cards. This section describes how to reinstall the Toshiba Card Manager files and set them up to work with your computer and PC cards.
1Remove any diskette from the external diskette drive and insert the diskette labeled Toshiba Card Manager.
2Exit Windows.
3From the system prompt, type a: and press Enter. The prompt indicates that the external diskette drive is the active drive.
4Type install and press Enter. The installation program shows a welcome screen.
5Press any key to continue.
The installation program asks if a previous version of Toshiba Card Manager is already installed on your hard disk.
6Press N. The installation program asks you to enter the desired directory.
7Press Y to accept the default C:\PCMPLUS3 directory. The installation program copies the Toshiba Card Manager files to the hard disk and returns you to a system prompt.
1From the system prompt, type c: and press Enter. The prompt indicates that the hard disk is the active drive.
2Type cd\pcmplus3 and press Enter. The prompt shifts to the PCMPLUS3 directory.
3Type pcmsetup and press Enter. The setup program displays several messages.
4Press any key three times to acknowledge the messages and continue.
The setup program asks which setup mode you wish to use.
5Highlight Quick Mode and press Enter.
NOTE:This guide gives instructions for setting up Toshiba Card Manager in Quick Mode. If you want more control over the setup process, use the Advanced Mode, following the steps in the Toshiba Card Manager User's Guide.
The setup program asks you to enter the number of PC card sockets.
6Make sure the number is set to two and press Enter.
The setup program asks if you want to be able to use PC cards from Windows.
7Highlight Yes and press Enter.
The setup program asks you to enter the directory and path where your Windows files are located.
8Press Enter to accept the default path.
The setup program asks if you'll be using Flash memory cards.
9Highlight No and press Enter.
Of course, if you're planning on using a Flash memory card in the immediate future, choose Yes.
NOTE:Flash memory PC cards are different from the memory modules described in the T2150CD Series User's Guide.
The setup program asks if you'll be using a modem.
10Highlight Yes and press Enter. If you intend never to use a modem, highlight No.
The setup program asks you to select the modem port.
11Highlight COM2 and press Enter.
The setup program asks if you'll be using ATA hard drive cards.
12Highlight No, unless you're expecting to use an ATA card in the immediate future, and press Enter.
If you have an ATA card, choose Yes.
13Press Enter without tagging anything, unless you're installing a network card. If you're going to be connecting to a network, select the network type and press Enter.
The setup program displays two messages indicating further required steps. Since the setup program performs these steps automatically, you can ignore these messages.
14Press any key twice to clear the messages and continue.
15Highlight Yes and press Enter to save your changes and return to the system prompt.
Toshiba Card Manager is now set up to support modems and/or any other PC card devices you selected.
The CONFIG.SYS and AUTOEXEC.BAT files control the state of the computer when you start or restart it. Many of the installation and setup programs you've run have modified these files. Follow the steps in this section to make sure these files contain the correct commands. For more information about the CONFIG.SYS and AUTOEXEC.BAT files, see your MS-DOS documentation.
1Make sure Windows is running. If it isn't, type win and press Enter to start it now.
2In Program Manager, choose Run from the File menu.
Windows opens the Run dialog box.
3Type sysedit and choose OK.
Windows opens the system editor, containing four configuration files.
4Select the CONFIG.SYS window.
Sysedit displays the CONFIG.SYS file.
5Make sure your file is the same as the following, making any necessary changes:
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE NOEMS HIGHSCAN X=C800-C8FF
REM BY PCM+ X=C800-C8FF
BUFFERS=15,0
FILES=30
FCBS=4,0
STACKS=9,256
DOS=UMB
LASTDRIVE=E
DOS=HIGH
DEVICEHIGH=C:\MOUSE\MOUSE.SYS
DEVICE=C:\PCMPLUS3\CNFIGNAM.EXE /DEFAULT
DEVICEHIGH=C:\PCMPLUS3\PCMSS.EXE
DEVICEHIGH=C:\PCMPLUS3\PCMCS.EXE
DEVICEHIGH=C:\PCMPLUS3\PCMRMAN.SYS
DEVICEHIGH=C:\PCMPLUS3\PCMSCD.EXE
DEVICE=C:\CDDRV\TOSCDROM.SYS
DEVICEHIGH=C:\DOS\SETVER.EXE
DEVICEHIGH=C:\DOS\POWER.EXE
6Select the AUTOEXEC.BAT window. Sysedit displays the AUTOEXEC.BAT file.
7Make sure the file is the same as the following, making any necessary changes:
@ECHO OFF
PROMPT $p$g
PATH C:\WINDOWS;C:\DOS;C:\MOUSE
LH C:\DOS\SHARE.EXE /L:500
REM PCM+ path added
PATH PCMPLUS3;%PATH%
SET LMOUSE=C:\MOUSE
SET TEMP=C:\DOS
LH C:\DOS\SMARTDRV.EXE /X
C:\DOS\MSCDEX /D:TOSCD001 /M:10
WIN
NOTE:In the PROMPT command, the $p$g must be in lower-case.
8Choose Save from the File menu to save changes to both the CONFIG.SYS and AUTOEXEC.BAT files.
9Choose Exit from the File menu to close the system editor.
Toshiba's advanced display driver provides maximum display speed and resolution in Windows. To install the driver, follow these steps:
1Remove any diskette from the external diskette drive and insert the diskette labeled Toshiba Windows Advanced Display Drivers.
2Make sure Windows is running. If it isn't, type win and press Enter to start it now.
3In Program Manager, choose Run from the File menu. Windows opens the Run dialog box.
4Type a:\winsetup and choose OK. The Chips and Technologies™ setup program displays a Welcome screen.
5Choose Continue. The setup program asks you to choose a directory.
6Choose Continue to accept the default directory.
The setup program displays a message indicating the end of the installation.
7Choose OK to close the message box.
8Choose OK to accept the default setting.
9Choose Restart Windows. Windows restarts with your changes in effect.
To install the online T2150CD Series User's Guide, follow these steps:
1Remove any diskette from the external diskette drive and insert the diskette labeled T2150CD User's Guide Diskette.
2Make sure Windows is running. If it isn't, type win and press Enter to start it now.
3In Program Manager, choose Run from the File menu. Windows opens the Run dialog box.
4Type a:\install and choose OK.
5When the installation program prompts you for information, press Enter to accept the default settings.
To install the Microsoft Tools for Windows, follow these steps:
1If you are in Windows, close Windows to return to an MS-DOS system prompt.
2Type c:\dos\setup /e and press Enter.
3When the setup program asks you for information, press Enter to accept the default settings.
4Press Ctrl + Alt + Del to restart the computer. The Microsoft Tools are now ready to use.
To set up Windows to take full advantage of your computer's power-saving features, follow these steps:
1Exit Windows.
2From the system prompt, type c: and press Enter. The prompt indicates that the hard disk is the selected drive.
3Type cd \windows and press Enter. The prompt shifts to the WINDOWS directory.
4Type setup and press Enter. The Windows Setup program displays a list of system options.
5Make sure Computer is highlighted and press Enter. Setup displays a list of computer types.
6Highlight MS-DOS System with APM and press Enter. Setup asks you to confirm your choice.
7Press Enter. Setup asks you to enter the desired directory.
8Press Enter to use the default directory.
9Change diskettes as indicated.
The next time you start Windows, it will use the advanced power management features of your computer.
Now it's time to reinstall the additional programs that came with your computer or that you've purchased. Refer to the programs' documentation for installation instructions.
This section provides instructions for reconfiguring your computer using the master program CD-ROM you purchased from the Toshiba Disk Fulfillment Center. Refer to "Reconfiguring Using Diskettes" on page 5 if you're reconfiguring your computer using master program diskettes.
Before you begin reinstalling programs with the master program CD-ROM, complete the steps in "Format the Hard Disk" on page 2, "Install MS-DOS" on page 3, and "Install the Toshiba Companion Programs" on page 4.
The CONFIG.SYS and AUTOEXEC.BAT files control the state of the computer when you start or restart it. Follow the steps in this section to load the CD-ROM driver and configure the drive.
To load the CD-ROM driver, follow these steps:
1At the system prompt, type edit c:\config.sys and press Enter. MS-DOS displays the CONFIG.SYS file.
2Press the down arrow key to move the cursor one line below the line reading FILES=30.
3Add the line DEVICE=C:\CDDRV\TOSCDROM.SYS. Your file should now read:
DEVICE=C:\DOS\SETVER.EXE
DEVICE=C:\DOS\HIMEM.SYS
DOS=HIGH
FILES=30
DEVICE=C:\CDDRV\TOSCDROM.SYS
4Press Alt + F to open the file menu, then type X to close the CONFIG.SYS file.
5MS-DOS displays the message Loaded File is Not Saved. Save it Now? (Y/N)
6Type Y or press Enter.
MS-DOS saves the changes to your CONFIG.SYS file.
To configure the CD-ROM drive, follow these steps:
1At the system prompt, type edit c:\autoexec.bat and press Enter.
MS-DOS displays the AUTOEXEC.BAT file.
2Press the down arrow key to move the cursor one line below the line reading SET TEMP=C:\DOS.
3Add the line C:\DOS\MSCDEX /D:TOSCD001 /M:10. Your file should read:
C:\DOS\SMARTDRV.EXE /X
@ECHO OFF
PROMPT $P$g
PATH C:\DOS
SET TEMP C:\DOS
C:\DOS\MSCDEX /D:TOSCD001 /M:10
4Press Alt + F to open the file menu, then type X to close the AUTOEXEC.BAT file.
MS-DOS displays the message Loaded file is not saved. Save it now? (Y/N)
5Type Y or press Enter.
MS-DOS saves the changes to your AUTOEXEC.BAT file.
The rest of the programs that came pre-installed on your computer can be reinstalled from the master program CD-ROM.
To install all the programs that came pre-installed on your T2150CD Series computer at once, complete the following steps. To install programs individually, refer to "Reinstall Individual Programs from the Master Program CD-ROM" on page 26.
1Insert the master program CD-ROM into the internal CD-ROM drive.
2Turn on the computer or restart it by pressing Ctrl + Alt + Del.
3Type d: and press Enter to log onto the CD-ROM drive.
4Type cd\tsed and press Enter.
5Type setup and press Enter.
6Press Enter twice.
7When setup is complete, it displays: You must reboot your computer. Press any key to continue.
8Press Enter.
1At the prompt D:\TSED, type cd\ and press Enter.
2Type xcopy /E /Y preinstl\*.* c:\ and press Enter. (Make sure you type the command options /E and /Y in upper-case.)
MS-DOS copies the program files to your hard disk. This process should take about 10 minutes.
3When the pre-install process is complete, press Ctrl + Alt + Del to restart your computer.
Upon restarting, Windows prompts you for your name, company, and other information.
1Type in the requested information and choose Continue.
Windows displays a dialog box to verify the information you typed.
2Make sure the information is correction and choose Continue. Windows prompts you to select a printer.
3Select the type of printer you are using from the list and choose Install or press Enter.
4Select the port to which your printer is connected (usually LPT1:) and choose Install.
The computer starts Windows.
If your master program CD-ROM (or any CD-ROM) is inserted in the CD-ROM drive, magiCDisc's CD Inspector dialog box appears.
5Choose the exit icon to exit magiCDisc.
For more information about magiCDisc, refer to the "T2150CD Series User's Guide."
If you own a T2150CDS, the installation is complete.
If you own a T2150CDT and are reinstalling Windows for Workgroups 3.11, continue with the steps in "Reinstalling Windows for Workgroups (T2150CDT)" on page 22.
If you own a T2150CDT and are reinstalling Windows 3.11, continue with the steps in "Reinstalling Windows 3.11 (T2150CDT)" on page 24.
This section explains how to reinstall Windows for Workgroups 3.11 on a T2150CDT computer.
1In the Windows Program Manager window, open the Main program group window by choosing its icon.
2Choose the Control Panel icon.
Windows displays the Control Panel window.
3Choose the Enhanced icon.
Windows displays the Enhanced dialog box.
4Choose Virtual Memory.
Windows displays the Virtual Memory dialog box.
5Choose Change.
The Virtual Memory dialog box displays the settings for virtual memory.
6Set the New Size to 8095.
NOTE:If you have added memory to your computer, Windows selects a default size for you based on the amount of memory installed.
7Make sure 32-Bit Disk Access and 32-Bit File Access are turned on (an X in the check box turns the option on).
8Set the 32-Bit File Access cache size to 2048.
9Choose OK.
Windows displays the message, Are you sure you want to make changes to virtual memory settings?
10Choose Yes.
11In the Enhanced dialog box, choose OK.
Windows displays the Virtual Memory dialog box.
12Choose Continue.
13Exit Windows and proceed to the next section.
1Exit Windows.
2At the system prompt, change to the root directory by typing cd\.
3Type edit autoexec.bat and press Enter.
MS-DOS displays the AUTOEXEC.BAT file.
4Locate the line that reads: C:\DOS\SMARTDRV.EXE 1024 128
5Change the line to read: C:\DOS\SMARTDRV.EXE 2048 128
The AUTOEXEC.BAT file should now read as follows:
@ECHO OFF
PROMPT $p$g
PATH C:\WINDOWS;C:\DOS;C:\MOUSE
REM PCM+ path added.
PATH PCMPLUS3;%PATH%
SET LMOUSE=C:\MOUSE
SET TEMP=C:\DOS
LH C:\DOS\MSCDEX /L:D /D:TOSCD001 /M:10
C:\DOS\SMARTDRV.EXE 2048 128
C:\MOUSE\MOUSE
REM LH C:\DOS\SHARE.EXE /L:500
WIN
6Press Alt + F to open the file menu.
7Type X to close the AUTOEXEC.BAT file.
MS-DOS displays the message, Loaded file is not saved. Save it now?
8Type Y or press Enter.
MS-DOS saves your changes to the AUTOEXEC.BAT file.
9Restart your computer for the changes to take effect (Ctrl + Alt + Del).
This section explains how to reinstall Windows 3.11 on a T2150CDT computer.
1In the Program Manager window, open the Main group window by choosing its icon.
2Choose the Control Panel icon. Windows displays the Control Panel window.
3Choose the 386 Enhanced icon. Windows displays the 386 Enhanced dialog box.
4Choose Virtual Memory. Windows displays the Virtual Memory dialog box.
5Choose Change. The Virtual Memory dialog box displays the settings for virtual memory.
6Change the swap file New Size to 27632.
NOTE:If you have added memory to your computer, Windows selects a default size for you based on the amount of memory installed.
7Make sure 32-Bit Disk Access is turned on (an X in the check box turns the option on).
8Choose OK. Windows displays the message, Are you sure you want to make changes to virtual memory settings?
9Choose Yes.
10In the 386 Enhanced dialog box, choose OK.
11When asked if you want to restart Windows, choose No.
12Exit Windows and proceed to the next section.
1At the system prompt, change to the root directory by typing cd\.
2Type edit autoexec.bat and press Enter.
The AUTOEXEC.BAT file should now read:
@ECHO OFF
PROMPT $p$g
PATH C:\WINDOWS;C:\DOS;C:\MOUSE
REM PCM+ path added.
PATH PCMPLUS3;%PATH%
SET LMOUSE=C:\MOUSE
SET TEMP=C:\DOS
LH C:\DOS\MSCDEX /L:D /D:TOSCD001 /M:10
C:\DOS\SMARTDRV.EXE /X
C:\MOUSE\MOUSE
LH C:\DOS\SHARE.EXE /L:500
WIN
3Check the line that reads: C:\DOS\SMARTDRV.EXE /X.
4Press Alt + F to open the file menu.
5Type X to close the AUTOEXEC.BAT file.
MS-DOS displays the message, Loaded file is not saved. Save it now?
6Type Y or press Enter.
MS-DOS saves your changes to the AUTOEXEC.BAT file.
7Restart your computer for the changes to take effect (Ctrl + Alt + Del).
This section explains how to reinstall individual programs from the master program CD-ROM.
The master program CD-ROM contains all of the software that came pre-installed on your T2150CD Series computer (except MS-DOS, which is provided on diskettes). Refer to the following table to determine the directory in which the program files are located and whether they require an MS-DOS or a Windows installation:
| Install from: | |||
| Software | Directory | MS-DOS | Windows |
| Logitech MouseWare 6.32 | ACUPOINT | X | |
| Toshiba magiCDisc | MAGICD | X | |
| Toshiba Card Manager 3.0 | PCMPLUS3 | X | |
| Online Documentation (Toshiba T2150CD User's Guide) | REFMANUL | X | |
| Toshiba ESS Sound System | SOUND | X | |
| Toshiba Windows Advanced Display Drivers | SVGA | X | |
| Toshiba Special Enhancements | TSED | X | |
| Microsoft Video for Windows Runtime | VID4WIN | X | |
| Microsoft Windows for Workgroups 3.11
or Microsoft Windows 3.1 |
WFW311 or WIN311 * | X | |
| Toshiba Windows Utilities | WINUTILS | X | |
* The CD-ROM has either Windows for Workgroups 3.11 or Microsoft Windows 3.11. When prompted for a Windows disk, use the appropriate directory on the CD-ROM.
To install Microsoft Windows for Workgroups 3.11 or Microsoft Windows 3.11, follow these steps:
NOTE:If Windows is still on your hard drive, and you are installing "over"the old installation, start with step #1. If Windows is not on your hard drive, start with step #8.
1At the system prompt, type cd\windows and press Enter.
2Type setup and press Enter.
3Using the up and down arrow keys, select Display and press Enter.
4Using the up and down arrow keys, select VGA from the scrolling list box and press Enter.
5Press Enter to keep the currently installed VGA driver.
6Insert the master program CD-ROM into the CD-ROM drive.
7To reinstall Microsoft Windows for Workgroups 3.11, type d:\wfw311\setup at the system prompt and press Enter.
To reinstall Microsoft Windows 3.11, type d:\win311\setup at the system prompt and press Enter.
The installation program begins.
8When the installation program prompts you for information, press Enter to accept the default settings.
Refer to Microsoft Windows or Microsoft Windows for Workgroups documentation for more information.
NOTE:When you start Windows, it will be slightly different than when you first started the computer. The opening screen displays "Microsoft" instead of "Toshiba," the wallpaper is different and several unnecessary icons are not included. These changes are cosmetic only and do not affect the operation of your computer or Windows.
To reinstall an individual program from MS-DOS, follow these steps:
1Insert the master program CD-ROM into the CD-ROM drive.
2Exit Windows.
3Type cd\ and press Enter to log onto the root directory.
4Refer to the following table for the command line that runs the installation program for the files you wish to reinstall.
| Software to Reinstall | Command Line |
| Toshiba Card Manager 3.0 | d:\pcmplus3\install |
| Toshiba Special Enhancements | d:\tsed\setup |
5Type the appropriate command line and press Enter.
For example, to reinstall Toshiba Card Manager 3.0, type d:\pcmplus3\install and press Enter.
The installation program begins.
6When the installation program prompts you for information, press Enter to accept the default settings.
NOTE:Reinstalling Toshiba Card Manager 3.0 may create a conflict between the interrupt request number (IRQ) of the PC card slot and the IRQ of the CD-ROM drive.
To reinstall an individual program from Windows, follow these steps:
1Insert the master program CD-ROM into the CD-ROM drive.
2Make sure Windows is running. If it isn't, type win and press Enter to start it now.
3In the Program Manager window, choose Run from the File menu.
Windows displays the Run dialog box.
4Refer to the following table for the command line that runs the installation program for the files you wish to reinstall.
| Software to Reinstall | Command Line |
| AccuPoint driver | d:\acupoint\install |
| magiCDisc | d:\magicd\disk1\setup |
| Online Documentation (T2150CD Series User's Guide) | d:\refmanul\install |
| Toshiba ESS Sound System Software | d:\sound\setup |
| Windows Advanced Display Drivers | d:\svga\winsetup |
| Microsoft Video for Runtime | d:\vid4win\setup |
| Toshiba Windows Utilities (Fn-esse, MaxTime, Hardware Setup) | d:\winutils\setup |
5Type the appropriate command line in the Command Line field and choose OK or press Enter.
For example, to reinstall Microsoft Video for Runtime, type d:\vid4win\setup in the Command Line field and choose OK or press Enter. The installation program begins.
6When the installation program prompts you for information, press Enter to accept the default settings.