_______________________________________________________________
Reconfiguration Guide for T2155CDS Addendum (90119)
Summary: |
Reconfiguration Guide for T2155CDS |
Date: |
October 25, 1995 |
Product: |
T2155CDS |
Additional Information: |
None |
The T2150 Series Reconfiguration Guide tells you how to reinstall and set up programs, such as MS-DOS and Windows, that are pre-installed on your hard disk.
Your T2155CDS computer comes with all of the same basic programs as the T2150CD Series computer, along with several additional programs. This addendum describes how to reinstall these additional programs.
The additional programs are:
¨Lotus Organizer
¨ClarisWorks® 3.0
¨ClarisWorks Business and Home Templates
¨ClarisWorks Users Guide
¨Quicken® Special Edition
¨The Toshiba Discovery Center
¨MCS MusicRack from Animotion
¨Several additional CD-ROM based programs
NOTE:After reinstalling any of the following programs, the Program Manager program groups may not look the same as when you first started your computer.
You may reinstall these programs in any order. If you dont plan on using one of the programs included in this addendum, save some valuable hard disk space by leaving it uninstalled.
You may reinstall the programs from diskette or CD-ROM:
¨To reinstall programs from diskette, see Reinstalling the Programs from Diskette on page 3.
¨To reinstall programs from CD-ROM, see Reinstalling the Programs from CD-ROM on page 8.
NOTE:If youre reinstalling everything on your hard disk, follow the steps in the T2150CD Series Reconfiguration Guide before reinstalling any of the programs included in this addendum.
This section describes how to reinstall programs on your hard disk from diskettes.
To reinstall Lotus Organizer, follow these steps:
1Insert the diskette labeled Lotus Organizer disk 1 of 3 into the diskette drive.
2Make sure Windows is running. If it isnt, type win and press Enter to start it now.
3In Program Manager, choose Run from the File menu.
Windows opens the Run dialog box.
4Type a:\install and choose OK.
Program Manager starts the Lotus Installation Program.
5When the installation program asks you for information, press Enter to accept the default values.
6Change diskettes when the installation program asks you to do so.
The installation program asks if you want it to modify your AUTOEXEC.BAT file.
7Press Enter to accept the modifications.
When the installation is complete, the installation program asks if you want to restart the computer.
8Press Enter to restart the computer with the new AUTOEXEC.BAT settings in effect.
To reinstall ClarisWorks 3.0, follow these steps:
1Insert the diskette labeled ClarisWorks Disk 1 of 6 into the diskette drive.
2Make sure Windows is running. If it isnt, type win and press Enter to start it now.
3In Program Manager, choose Run from the File menu.
Windows opens the Run dialog box.
4Type a:\setup and choose OK.
Program Manager starts the Claris setup program.
5Press Enter to continue.
The setup program installs Microsoft Win32 and Freecell.
6When the setup program asks you for information, press Enter to accept the defaults.
7Once Win32 and Freecell are installed, press Enter to restart Windows and continue with the ClarisWorks installation.
8Insert the diskette labeled ClarisWorks Disk 2 of 6 into the diskette drive and press Enter.
9When the setup program asks you for information, press Enter to accept the defaults.
The setup program asks you to enter information about yourself.
10Type your name in the Name box.
11Press the tab key to highlight the Company Name box, type in the name of your company and press Enter.
12Change diskettes when the installation program asks you to do so.
13Choose OK when the setup process is complete.
To reinstall the ClarisWorks Business Template for ClarisWorks 3.0, follow these steps:
1Insert the diskette labeled ClarisWorks Business Templates into the diskette drive.
2At the system prompt, type xcopy a:\*.* c:\windows\claris /e and press Enter.
The computer copies the template files onto the hard disk and returns you to the system prompt.
To reinstall the ClarisWorks Home Template for ClarisWorks 3.0, follow these steps:
1Insert the diskette labeled ClarisWorks Business Templates into the diskette drive.
2At the system prompt, type xcopy a:\*.* c:\windows\claris\template and press Enter.
The computer copies the template files onto the hard disk and returns you to the system prompt.
To reinstall the ClarisWorks Users Guide, follow these steps:
1Insert the diskette labeled ClarisWorks Users Guide disk 1 of 2 into the diskette drive.
2Make sure Windows is running. If it isnt, type win and press Enter to start it now.
3In Program Manager, choose ClarisWorks from the Window menu.
4In Program Manager, choose Run from the File menu.
Windows opens the Run dialog box.
5Type a:\install and choose OK.
Program Manager starts the installation Program.
6Choose OK to accept the default directory.
7Choose OK to confirm and continue.
8Choose OK to accept the diskette drive as the installation drive.
The installation program begins installing files.
9Change diskettes when the installation program asks you to do so.
10Choose OK to confirm that the installation is complete.
To reinstall Quicken Special Edition, follow these steps:
1Insert the diskette labeled Quicken SE disk 1 of 5 into the diskette drive.
2Make sure Windows is running. If it isnt, type win and press Enter to start it now.
3In Program Manager, choose Run from the File menu.
Windows opens the Run dialog box.
4Type a:\install and choose OK.
Program Manager starts the installation program.
5Choose Install to select Express Installation.
6Change diskettes when the installation program asks you to do so.
7Choose OK to confirm that the installation is complete.
To reinstall the Toshiba Discovery Center, follow these steps:
1Insert the diskette labeled Discovery Center into the diskette drive.
2Make sure Windows is running. If it isnt, type win and press Enter to start it now.
3In Program Manager, choose Run from the File menu.
Windows opens the Run dialog box.
4Type a:\install and choose OK.
Program Manager starts the installation Program.
5Choose OK to accept the default directory.
6Choose OK to confirm your choice.
7Choose OK to accept the diskette drive as the installation drive.
The installation program begins installing files.
8Choose OK to confirm that the installation is complete.
To reinstall the Animotion MCS MusicRack, follow these steps:
1Insert the diskette labeled Animotion MCD MusicRack into the diskette drive.
2Make sure Windows is running. If it isnt, type win and press Enter to start it now.
3In Program Manager, choose Run from the File menu.
4Type a:\setup and choose OK.
Program Manager starts the setup program.
5From the list of options, choose Install.
6Choose OK to accept the default directory.
The setup program begins installing the files. After the installation is complete, the setup program asks you to select a file player.
7Choose Yes to accept the default player.
8Choose Yes to restart Windows.
This section describes how to reinstall programs on your hard disk from CD-ROM.
1Insert the Master Program CD-ROM into the CD-ROM drive.
2Make sure Windows is running. If it isnt, type win and press Enter to start it now.
3In Program Manager, choose Run from the File menu.
Windows opens the Run dialog box.
4Type d:\organizr\install and choose OK.
Program Manager starts the Lotus Installation Program.
5Type in your name and company and choose Next.
6Choose Yes to confirm that the information is correct.
7Choose Next to install all available features.
8Choose Next to accept the default drive and directory.
9Select or create a group into which to install the program icons and choose Next.
10Choose Yes to install the files onto the hard disk.
The installation program installs the files.
To reinstall ClarisWorks 3.0, follow these steps:
1Close Windows, if it is running, and return to a system prompt.
2Type edit c:\autoexec.bat and press Enter.
The Edit program loads the AUTOEXEC.BAT file, which looks similar to the following:
@ECHO OFF
PROMPT $p$g
PATH C:\WINDOWS;C:\DOS;C:\MOUSE
REM PCM+ path added.
SET PATH=C:\QTW;PCMPLUS3;%PATH%
SET LMOUSE=C:\MOUSE
SET TEMP=C:\DOS
LH C:\DOS\MSCDEX /D:TOSCD001 /M:10
C:\DOS\SMARTDRV.EXE /X
C:\MOUSE\MOUSE
C:\DOS\SHARE.EXE /F:4000 /L:500
WIN
3Change the PATH statement (the third line) to read:
PATH C:\WINDOWS;C:\DOS;C:\MOUSE;D:\CWORKS3
by adding the underlined section.
4Press Alt + f, then x to choose Exit from the File menu.
Edit saves your AUTOEXEC.BAT file and returns you to the system prompt.
5Press Ctrl + Alt + Del.
The computer restarts and loads Windows.
6Insert the Master Program CD-ROM into the CD-ROM drive.
7In Program Manager, choose Run from the File menu.
Windows opens the Run dialog box.
8Type d:\cworks3\setup and choose OK.
Program Manager starts the Claris setup program.
9Press Enter to continue.
The setup program runs through an initialization process.
10Press Enter to continue.
11Press Enter to accept the Windows system directory.
The setup program installs Win32 and Freecell.
12Choose OK.
13Press Enter to accept the default directory.
14Once Win32 and Freecell are installed, press Enter to restart Windows and continue with the ClarisWorks installation.
15Press Enter to accept the default installation.
16Press Enter to accept the default drive and directory.
The setup program asks you to enter information about yourself.
10Type your name in the Name box.
11Press the tab key to highlight the Company Name box, type in the name of your company and press Enter.
19Choose OK when the setup process is complete.
20Edit the AUTOEXEC.BAT file and remove the directory you added earlier (;CWORKS3) from the PATH statement, making it read:
PATH C:\WINDOWS;C:\DOS;C:\MOUSE
To reinstall the ClarisWorks Business Template for ClarisWorks 3.0, following these steps:
1Insert the Master Program CD-ROM into the CD-ROM drive.
2At the system prompt, type xcopy d:\cwtemps\business\*.* c:\windows\claris\template /e and press Enter.
The computer copies the template files onto the hard disk and returns you to the system prompt.
To reinstall the ClarisWorks Users Guide, follow these steps:
1Insert the Master Program CD-ROM into the CD-ROM drive.
2Make sure Windows is running. If it isnt, tpe win and press Enter to start it now.
3In Program Manager, choose Run from the File menu.
Windows opens the Run dialog box.
4Type d:\cworksug\install and choose OK.
Program Manager starts the installation program.
5Choose OK to accept the default directory.
6Choose OK to accept the default installation drive.
The installation program installs the files.
7Choose OK to confirm that the installation is complete.
To reinstall Quicken Special Edition, follow these steps:
1Insert the Master Program CD-ROM into the CD-ROM drive.
2Make sure Windows is running. If it isnt, type win and press Enter to start it now.
3In Program Manager, choose Run from the File menu.
Windows opens the Run dialog box.
4Type d:\quicken4\install and choose OK.
Program Manager starts the installation program.
5Choose Install.
The installation program installs the files.
6Choose OK to confirm that the installation is complete.
To reinstall the Toshiba Discovery Center, follow these steps:
1Insert the Master Program CD-ROM into the CD-ROM drive.
2Make sure Windows is running. If it isnt, type win and press Enter to start it now.
3In Program Manager, choose Run from the File menu.
Windows opens the Run dialog box.
4Type d:\dcenter\install and choose OK.
Program Manager starts the installation program.
5Choose OK to accept the default drive and directory.
6Choose OK to accept the default installation directory.
The installation program installs the files.
8Choose OK to confirm that the installation is complete.
To reinstall the Animotion MCS MusicRack, follow these steps:
1Insert the Master Program CD-ROM into the CD-ROM drive.
2Make sure Windows is running. If it isnt, type win and press Enter to start it now.
3In Program Manager, choose Run from the File menu.
4Type d:\animotn\setup and choose OK.
Program Manager starts the setup program.
5Choose Install.
6Choose OK to accept the default directory.
The setup program installs the files.
7Choose Yes to accept the default WAVE and MIDI players.
8Choose Yes to restart Windows.
Your T2155CDS computer may have come with several additional programs on CD-ROM. To reinstall these programs, refer to the installation instructions accompanying each individual program.