Conventional Memories

This page is part of my Toshiba Tech Access archive project, to learn more please visit the project page, Some of the files from the Toshiba BBS referenced here can also be found there.

Index

_______________________________________________________________

TECHNICAL NOTE (96501)

The D-Link 651 PCMCIA ethernet adapter was successfully tested in the T3400CT and the T3300SL.

Testing on the T3400CT was done using Toshiba Card Manager v1.0. The following configuration should work fine with any systems which support PCMCIA.

Testing on the T3300SL was done using a driver provided by D-Link designed specifically for the T3300SL.

CONFIGURATION FOR THE T3400CT

CONFIG.SYS

DEVICE=C:\DOS\HIMEM.SYS

DEVICE=C:\DOS\EMM386.EXE noems x=c800-CBFF X=D600-DBFF

FILES=30

DOS=UMB

LASTDRIVE=E

FCBS=4,0

DOS=HIGH

STACKS=9,256

[COMMON]

DEVICE=C:\PCMPLUS\PCMSS.EXE

DEVICE=C:\PCMPLUS\PCMCS.EXE /WAIT=20 /ADDR=C8 /IRQ=10 DEVICE=C:\PCMPLUS\PCMSCD.EXE /LANIRQ=5

NET.CFG

LINK DRIVER DE650ODI

INT 5 (Set interrupt to 5) PORT 320 (Set I/O port to 320)

MEM D6000 (Set memory address to D6000) FRAME ETHERNET_802.3

**** IMPORTANT *****

The 'PORT' parameter must be set to 320 and the 'MEM' parameter must be at D6000 for the adapter to initialize. This is required only when using the Phoenix drivers (Toshiba Card Manager).

AUTOEXEC.BAT or NET.BAT

LSL

DE650ODI

IPXODI

NETX

CONFIGURATION for T3300SL

CONFIG.SYS

DEVICE=C:\dos\HIMEM.SYS

DEVICE=C:\DOS\EMM386.EXE NOEMS X=D000-D7FF DEVICE=C:\DOS\SETVER.EXE

DOS=HIGH,umb

FILES=60

BUFFERS=25

DEVICEHIGH=C:\DOS\ANSI.SYS

STACKS=0,0

AUTOEXEC.BAT or NET.BAT

DCD (D-Link driver - or use ICCNT.EXE) LSL

DE650ODI

IPXODI

NETX

_______________________________________________________________

Toshiba America Information Systems Inc. (" TAIS ") shall not be liable for damages of any kind for use of this information, Which is subject to change without notice. Copyright 1994, 1995 TAIS.