PCMCIA Xircom Ethernet Adapter on Toshiba computers (96503)

This page is part of my Toshiba Tech Access archive project, to learn more please visit the project page, Some of the files from the Toshiba BBS referenced here can also be found there.

Index

_______________________________________________________________

TECHNICAL NOTE (96503)

Summary:	PCMCIA Xircom Ethernet Adapter on Toshiba computers
Date:	September 29, 1995
Product:	As listed
Problem / Issue:	Compatibility & Installation
Solution:	See Below
Additional Information:	TSB-0255-y

The Xircom Ethernet PCMCIA cards have been tested successfully in the Toshiba T100X, T1900 series, T1910, T1950, T3300SL, T3400, T4500 series, T4600 series, T4700 and T6600C. The Xircom ethernet PCMCIA card is available in either 10baseT or 10base2(Thinnet). To configure these cards for Novell workstations, please follow these instructions:

CECFG (enabler, (From A:\) can be in the config.sys DEVICE=CECFG.EXE) LSL (From A:\ODI)

CEODI (From A:\ODI)

IPXODI (From A:\ODI)

NETX (From A:\ODI)

The NET.CFG from A:\ODI is as follows:

link driver ceodi

frame ethernet_802.3

frame ethernet_II

int 5

port 300

mem d000

iowordsize 16

socket 1

T4600

When using a T4600 with the top socket (5 mm slot - socket B), modify the NET.CFG to read SOCKET 2.

NET.CFG