_______________________________________________________________
| Summary: | PCMCIA OS/2 2.1 TOKEN RING DRIVERS |
| Last Update: | September 20th 1994 |
| Product: | As Listed |
| Problem / Issue: | Installation of Token Ring Drivers in a T4600C |
| Solution: | See below |
| Additional Information: | TSB0239 |
We have tested IBM OS/2 2.1 with IBM Lan Requester 2.0 on a T4600C with the following PCMCIA Token Ring cards:
IBM PCMCIA Token Ring
Pure Data PCMCIA Token Ring
Thomas Conrad PCMCIA Token Ring
The cards were inserted in the bottom (SOCKET A) PCMCIA slot running at 16 Mbps.
To install the IBM OS/2 2.1 drivers, please follow these instructions:
1. Download PCMOS2TR.ZIP from Toshiba Canada's BBS (905-470-7122).
2. Install IBM OS/2 2.1.
3. Install IBM DOS Lan Requester 2.0 for "IBM Token-Ring Network Adapters".
4. Reboot the computer.
5. Pkunzip the PCMOS2TR.ZIP into C:\PCMCIA directory.
6. Edit the CONFIG.SYS file so that the following lines appear:
DEVICE=C:\OS2\PCMCIA.SYS
DEVICE=C:\OS2\MDOS\VPCMCIA.SYS
(We used the PCMCIA.SYS file that was shipped with IBM OS/2 2.1)
7. Edit the CONFIG.SYS so that the last two lines are as follows:
DEVICE=C:\OS2\IBM2SS01.SYS
DEVICE=C:\OS2\ICRMU01.SYS
8. COPY C:\PCMCIA\IBM2SS01.SYS C:\OS2
COPY C:\PCMCIA\ICRMU01.SYS C:\OS2
9. Install the MAC driver and IBMTOKCS.OS2
COPY C:\PCMCIA\IBMTOKCS.OS2 C:\IBMCOM\MACS
COPY C:\PCMCIA\IBMTOKCS.NIF C:\IBMCOM\MACS
COPY C:\PCMCIA\LTG.MSG C:\IBMCOM
COPY C:\PCMCIA\LTGH.MSG C:\IBMCOM
10. Replace the existing IBMTOK.OS2 driver with the following line in the CONFIG.SYS:
DEVICE=C:\IBMCOM\MACS\IBMTOKCS.OS2