_______________________________________________________________
| Summary: | Novell Netware Requester OS/2 WARP 3 with PCMCIA Ethernet |
| Date: | October 25, 1995 |
| Product: | T2150CD Series |
| Additional Information: | None |
Note: This setup was tested on a T2150 with IBM OS/2 WARP V3 and a Noteworthy PCMCIA Ethernet Card.
System Requirements:
5MB (or greater) of memory
OS/2 WARP 3 disks or CD-ROM
ETENG201.EXE (Ethernet Card Drivers)
Netware Requester OS/2 2.1 (available from Novell)
Install OS/2 WARP with PCMCIA support:
- If OS/2 WARP is already installed but without PCMCIA support, use 'SELECTIVE INSTALL' to add the PCMCIA drivers.
NOTE: The following line should be in the OS/2 CONFIG.SYS file:
BASEDEV=x:PCMCIA.SYS
DEVICE=x:\OS2\MDOS\VPCMCIA.SYS
(where x is the OS/2 drive letter)
Verify OS/2 Socket Services:
- Edit the OS/2 CONFIG.SYS file and check for the following line:
BASEDEV=IBM2TOS1.SYS /s0=2 /c0=11
** Note - /s0=X (X=# of slots)
/c0=X (X=Interrupt)
5) Save the CONFIG.SYS, shutdown OS/2 Warp and reboot the computer
Install Novell Netware Requester for OS/2:
1) Locate the five Netware Requester diskettes.
2) Insert diskette #1. From an OS/2 Window, change directories to the Workstation
Install disk (A:), type 'INSTALL' and press ENTER.
3) The following windows will appear (in order):
"Netware Requester Installation Utility"
- select Installation/'Requester On Workstation'
'Set Target Directory'
- select the defaults
'Requester Installation'
- select the defaults
'Step 1 - Choose the ODI LAN Driver'
- type in PCMDMCS.SYS
'Step 2 - Choose Netware Support for DOS and Windows Applications'
- set IPX Support = ON
- set Default NetWare Shell Support = GLOBAL
'Step 3 - Choose Optinal Protocols'
- these are optional, you can select SXP and/or NetBIOS emulation if you like
'Save Changes to CONFIG.SYS'
- accept the default
'Copy ODI LAN Driver Files'
- accept defaults
'Copy Requester Files'
- accept defaults
- The NetWare files will now copy into the appropriate directory.
- The CONFIG.SYS will be automatically edited
4) Exit out of the NetWare installation Utility window
********** DO NOT REBOOT ************
5) Get the file ETENG201.EXE file from the Toshiba BBS (714) 837-4408
6) Extract the file to a high density (1.44MB) diskette by typing the following:
ETENG201 A: <enter>
7) Follow the directions on the screen the create the ethernet driver diskette.
Installing IBM Ethernet Novell OS/2 PCMCIA Enablers:
8) From an OS/2 window, type A: <enter> and type INSTALL
9) Select A: as the source drive
10) In the 'INSTALLATION OPTIONS' window select:
'Install IBM Ethernet Credit Card Files for Novell (OS/2)'
11) the next screen will prompt you for the Target drive, select the OS/2 drive (the drive you installed NETWARE)
12) press enter until you get to the screen:
Ethernet Frame Type Selection Screen
13) Select the appropriate frame type: ie. 1 (803.3 for Netware V3.11)
14) The next screen asks you for a Network Adapter Address
- select a VALID network address
15) The installation should be complete, exit, show-down, and reboot the system
Notes: - Server Utilities must be installed by someone with Supervisor Access.
- Follow installation instructions provided with OS/2 Netware Requester Server Utilities Installation
- OS/2 Netware Requester has seperate Startup and Login Scripts from Netware for DOS