_______________________________________________________________
PART #: NW288XJ SRP: $355.00
·28,000bps data transmission, 14,400bps fax transmission
·Industry standard V.34 compliance
·Convenient XJACK® connection
·Flash ROM for updating software compatibility
·Flash DSP for updating hardware compatibility
·High-speed communications drivers to optimize Windows performance
·FaxWorks Data data and fax communication software for Noteworthy
·Automatic installation and configuration software
·Hot insertion and removal
·DOS, Windows, and Win 95 compatible
The Noteworthy 28.8Kbps XJACK® modem is an important communication tool for busy mobile professionals. Business information is transmitted using the industry standard for speed and error-free throughput.
Featured on the modem is the patented XJACK® connector, which is rugged and easily connects to a standard RJ11 telephone cord, eliminating the need to carry an extra modem cable. The Noteworthy modem reliably sends data at 28,800bps with up to 115,200bps error-free throughput. Faxes are sent and receive at 14,4000bps.
The Noteworthy 28.8Kbps modem complies with the V.34 standard and offers the following benefits:
- V.8 handshaking process minimizes the connection negotiation time
- Line probing feature establishes the link at the fastest possible rate
- Incremental fall back feature allows the modem to slow down in small increments when
a noisy line is encountered, allowing the fastest overall speed
FaxWorks Data data and fax communications software accompanies every Noteworthy modem. Documents can be faxed directly from Windows.
The Noteworthy modem is designed for notebook computers with PCMCIA Type II, Type III, or Toshiba 16mm slot. The Noteworthy 28.8Kbps XJACK® Modem is the smart communications solution for mobile professionals
HARDWARE SPECIFICATIONS
Standards
·Hayes AT command set
Error Correction
·MNP 2 - 4, ITU V.42 error correction for transmission accuracy
Data Compression
·MNP 5, ITU V.42bis data compression for increased throughput
Protocols
| Bell 103 | Bell 21A |
| ITU V.21 | ITU V.22 |
| ITU V.22 A and B | ITU V.32 |
| ITU V.32bis | ITU V.34 |
Facsimile
| ·ITU Group III compatible | ·ITU V.17 |
| ·ITU V.21 Channel 2 | ·ITU V.27ter |
| ·ITU V.29 | ·EIA Class II commands |
Operating Modes
| ·Asynchronous | ·Full duplex |
| ·AutoSync | ·Automatic and manual call originate |
| ·Automatic and manual answer | · |
Asynchronous Data Rates
Transmission rate fall back through 300 bps.
Asynchronous Character Format
Up to 10 bits, including, data, start, stop, and parity bits
Dialing Capability
Tone and Rotary pulse
Pulse Dialing Rate
10 pulses per second
Pulse dialing duty cycle 39/61% (US) or 33/67% (UK/Hong Kong) make-to-break
Tones Detected
Dial, busy, ringback, and modem answer tones
Blind dialing based on time-out periods is available for incompatible tones
Compatible Public Switch Network Jacks
RJ11W, RJ41S, RJ11C
Line Requirements
Public switched telephone network including international connections
Ringer Equivalence
0.5B
Receive Sensitivity
-.43 dBm
Diagnostics
| Local analog loopback | Local digital loopback |
| Remote digital loopback | Local interface loopback |
·Operating Temperature: 0to 70 C, 32 to 155F
·Total Power Requirements
·275 mA operating mode
50mA sleep mode
STANDARD
Compliant with PCMCIA Release 2.1 or greater
·Warranty: Three-year warranty